---
title: "show layer2 mode"
slug: "show-layer2-mode"
tags: ["Product Usage", "IPS 10.1.10"]
updated: 2026-10-05T15:41:06Z
published: 2026-10-05T15:41:06Z
canonical: "docs.trellix.com/show-layer2-mode"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# show layer2 mode
This command displays all the Layer 2 Passthru feature settings. These settings are configured in the Manager user interface; some of the settings are configured through the CLI. Layer 2 Passthru is configured within the Manager user interface.
This command has no parameters.
**Syntax:**
show layer2 mode
Information displayed by the show layer2 mode command includes the following:
- Status of the Layer 2 Passthru feature (whether it is on or off)
- The set duration
- The set threshold
- The number of occurrences that have occurred within the previous duration
**Sample Output:**
intruShell@john> show layer2 mode
Mode : on
Duration : 10 minutes
Threshold : 1
Occurrences : 0
**Applicable to:**
NS-series Sensors