---
title: "show matd channel"
slug: "show-matd-channel"
tags: ["Product Usage", "IPS 10.1.10"]
updated: 2026-10-05T15:40:46Z
published: 2026-10-05T15:40:46Z
canonical: "docs.trellix.com/show-matd-channel"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# show matd channel
This command displays the channel used by Sensor to communicate with Intelligent Sandbox.
By default, SSL channel is used. You can switch between TCP and SSL channel to send files for scanning.
> [!NOTE]
> Note
>
> For TCP channel, make sure that the listening port 8506 is set on Intelligent Sandbox. From an ATD appliance, execute the set nsp-tcp-channel CLI command to enable or disable TCP channel.
**Syntax:**
show matd channel
**Sample output:**
IntruDbg#> show matd channel
MATD NSP channel type:SSL
IntruDbg#> show matd channel
MATD NSP channel type:TCP
**Applicable to:**
NS-series Sensors