--- title: "show mem-usage" slug: "show-mem-usage-1" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:41:06Z published: 2026-10-05T15:41:06Z canonical: "docs.trellix.com/show-mem-usage-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show mem-usage This command displays the system memory usage details of the device. This command has no parameters. **Syntax:** show mem-usage The show mem-usage command also gives the average percentage usage (Avg.) and the maximum percentage usage (Max.) of these entities on all the processing elements. The L7Dcap counter descriptions are as follows: - Avg. Used L7 Dcap flows across all PEs — Average percentage of L7Dcap flows used from the value configured in the Manager across all the Processing Engines in the Sensor - Max. Used L7 Dcap flows on a single PE — Percentage of L7Dcap flows used from the maximum value that a single Processing Engine manages **Sample Output:** - For Sensors, the output is as shown below: Avg. Used TCP and UDP Flows across all PEs : 0% Max. Used TCP and UDP Flows on a single PE : 0% Avg. Used Fragmented IP Flows across all PEs : 0% Max. Used Fragmented IP Flows on a single PE : 0% Avg. Used ICMP Flows across all PEs : 0% Max. Used ICMP Flows on a single PE : 0% Avg. Used SSL Flows across all PEs : 0% Max. Used SSL Flows on a single PE : 0% Avg. Used Fragment Reassembly Buffers across all PEs : 0% Max. Used Fragment Reassembly Buffers on a single PE : 0% Avg. Used Packet Buffers across all PEs : 0% Max. Used Packet Buffers on a single PE : 0% Avg. Used Attack Marker Nodes across all PEs : 0% Max. Used Attack Marker Nodes on a single PE : 0% Avg. Used Shell Marker Nodes across all PEs : 0% Max. Used Shell Marker Nodes on a single PE : 0% Avg. Used L7 Dcap flows across all PEs : 0% Max. Used L7 Dcap flows on a single PE : 0% **Applicable to:** NS-series Sensors