Displays submission information for the specified sensor.
Syntax
show mvx submission sensor-id {<sensor-id> | ALL}
Parameters
sensor-id
ID of the sensor.
ALL
Specifies all sensors.
Example
The following example displays the output of the show mvx submission sensor-id {<sensor-id> | ALL} command:
vx-1 (config) # show mvx submission sensor-id ALL
User role
Admin, Operator, or Monitor
Command mode
Enable
Supported appliances
This command is supported on the following appliance running the specified release or later:
Intelligent Virtual Execution - Server: Release 7.9. (sensor)