This CLI command displays IP address of the host machine.
This command has no parameters.
Syntax:show network ip
Sample Output:
IPSManager> show network ip
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:0c:29:fc:68:ce brd ff:ff:ff:ff:ff:ff
inet 10.1.1.1/24 brd 10.208.12.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fefc:68ce/64 scope link
valid_lft forever preferred_lft forever