--- title: "show ni status" slug: "show-ni-status-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:39Z published: 2026-11-19T12:27:39Z canonical: "docs.trellix.com/show-ni-status-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show ni status This command displays NI feature status (enabled or disabled) and the communication status between Trellix NI and Trellix IPS solution. It also shows other configuration details related to NI integration, such as NI appliance IP address, port, Client Group name, and NI config polling duration as set in the Client Group. Additionally, it displays NI L7 metadata configuration status (enabled or disabled), and the protocols for which it is enabled. > [!NOTE] > Note > > Currently, IPS Sensors export L7 metadata related to HTTP, HTTPS, HTTP2, SMTP, FTP, DNS, SMB, and DCERPC protocols to NI. For SMB and DCERPC protocols, Sensors running on version 11.1 Update 8 or later, and integrated with Trellix NI, send only SmartVision attack-related L7 metadata to NI. See [Harnessing SmartVision attacks for effective threat detection and response](/network-and-platform/docs/harnessing-smartvision-attacks-for-effective-threat-detection-and-response-1) for more information. **Syntax:** `show ni status` **Sample Output:** `IntruDbg#> show ni status` `NI Feature Status : ENABLED` `NI IP Address : 10.1.1.1` `NI IP Port : 443` `NI Group Name : IPSSantaClara` `NI Communication Status : UP` `NI Config Poll timer : 30:00 minutes` `NI Metadata Config : ENABLED` `NI Protocols Enabled : HTTP` **Applicable to:** NS-series and Virtual IPS Sensors