--- title: "show npulse analysis" slug: "show-npulse-analysis" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:09Z published: 2026-08-04T17:23:09Z canonical: "docs.trellix.com/show-npulse-analysis" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show npulse analysis Displays whether the integration with the PX Technology packet analyzer application is enabled. If it is enabled, the integration can be configured on the **Settings: Forensics** page in the Web UI. This command was deprecated and replaced with the command: [show px integration](/network-and-platform/docs/show-px-integration) . ### Syntax `show npulse analysis` ### Parameters None ### Example The following example displays the current forensic analysis status for PX integration. ``` hostname # show npulse analysis ``` ``` Npulse Analysis State ``` ``` ----------------------------- ``` ``` Licensed subfeature: no ``` ``` Administratively enabled: yes ``` ``` Operationally enabled: no ``` ### User role Admin, Monitor, or Operator ### Command mode Enable ### Supported appliances This command is supported on the following appliance running the specified release or later: - **Network Security** Before Release 7.5. Deprecated Release 8.3.0.