--- title: "show nsp scandetails" slug: "show-nsp-scandetails" updated: 2026-09-08T19:56:07Z published: 2026-09-08T19:56:07Z canonical: "docs.trellix.com/show-nsp-scandetails" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show nsp scandetails Shows the file scan details regarding the integrated IPS Sensors. ##### **Syntax**: **`show nsp scandetails <Sensor IP address>`** If you do not specify the Sensor IP address, the details are displayed for all the Sensors integrated with the Intelligent Sandbox Appliance. Information displayed by the **`show nsp scandetails`** command includes: - The IP address of the IPS Sensor. - Total number of packets received from the Sensor. - Total number of packets sent to the Sensor. - The timestamp of when the last packet was sent to and received from the Sensor. - The encryption method used for the communication with the Sensor. - Session handle null counts. - Count of internal errors. - Count of unknown commands received from the Sensor. - File string null. - File data null. - Count of unknown files. - Count of out of order packets. - Count of MD5 mismatches between what was sent by the Sensor and what was calculated by Intelligent Sandbox. - Count of memory allocation failures. - File transfer timeout. - New file count. - Count of shared memory allocation failures. - Count of the number of static analysis responses sent. - Count of the number of dynamic analysis responses sent. - Count of scan request received. - MD5 of the last file that was streamed by the Sensor. :