--- title: "show ntp authentication" slug: "show-ntp-authentication" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:09Z published: 2026-08-04T17:23:09Z canonical: "docs.trellix.com/show-ntp-authentication" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show ntp authentication Displays the authentication status and keys for active NTP servers and peers. ### Syntax ``` show ntp authentication ``` ### Parameters None ### Output fields The following table describes the output fields for this command. | Field | Description | | --- | --- | | Address | The IP address of the NTP server. (This command displays the IP address of the NTP server, even if you configured it with the hostname.) | | reachable | Whether the appliance can reach the NTP server. | | auth | The authentication status: **ok**—The authentication succeeded. **bad**—An authentication key is configured, but the authentication failed. **none**—No authentication key is mapped to the NTP server. **n/a**—An authentication key is configured, but the server not reachable yet. | | keyid | The integer from **1**—**16** that identifies the authentication key. | ### Example The following example shows that the appliance can reach all three NTP servers. Authentication keys are configured for the first two servers, and the authentication succeeded. No authentication key is mapped to the third server. ``` hostname > show ntp authentication NTP is administratively enabled. NTP authentication is administratively enabled. Active servers and peers: Address          reachable    auth     keyid ============================================ 172.16.2.3          yes        ok       2 10.30.4.3           yes        ok       15 192.168.10.12       yes        none     none ``` ### User role Admin, Operator, Monitor ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Email Security — Server**: Release 7.8.0 - **Endpoint Security (HX)**: Release 2.5