--- title: "show ntp configured" slug: "show-ntp-configured" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:09Z published: 2026-08-04T17:23:09Z canonical: "docs.trellix.com/show-ntp-configured" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show ntp configured Displays the current NTP status, and the configured NTP servers and their settings. ### Syntax ``` show ntp configured ``` ### Parameters None ### Output fields The following table describes the output fields for this command. | Field | Description | | --- | --- | | NTP enabled | Whether NTP is enabled on the appliance. | | NTP Authentication enabled | Whether NTP authentication is enabled on the appliance. | | No NTP peers configured | Indicates that no NTP peers are configured on the appliance. | | NTP server | Information about the NTP server: - *IP address or hostname*—The IP address or hostname that was used to configure the NTP server on the appliance. - **Enabled**—Whether NTP is currently enabled on the NTP server. - **NTP version**—The NTP version (**3** or **4**) running on the NTP server. - **Key**—An integer from **1**—**16** that identifies the authentication key mapped to the server. If no key is mapped, **none** is displayed. | ### Example The following example shows the current NTP status and NTP server information. ``` hostname > show ntp configured NTP enabled: yes NTP Authentication enabled: yes No NTP peers configured. NTP server 0.acme.pool.ntp.org  Enabled: yes  NTP version: 4  Key: 10 NTP server 1.acme.pool.ntp.org  Enabled: yes  NTP version: 4  Key: 12 NTP server 2.acme.pool.ntp.org  Enabled: no  NTP version: 4  Key: none ``` ### User role Admin, Operator, or Monitor ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis**: Before release 6.4 - **Central Management System**: Before release 6.4 - **Email Security — Server** :Before release 6.4. The `NTP Authentication` and `Key` output lines were introduced in EX Series Release 7.8.0. - **File Protect**: Before release 6.4 - **Endpoint Security (HX)**: Release 2.5 - **Network Security**: Before release 6.4