--- title: "show parsetunneledtraffic status" slug: "show-parsetunneledtraffic-status-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:07Z published: 2026-11-19T12:30:07Z canonical: "docs.trellix.com/show-parsetunneledtraffic-status-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show parsetunneledtraffic status Use the `show parsetunneledtraffic status` CLI command to know the current status of tunneling configuration. This command has no parameters. To enable or disable the tunneling configuration of a Sensor, use the `set parsetunneledtraffic` command. For more information on tunneling configuration, see the *Trellix Intrusion Prevention System Product Guide*. **Syntax:** `show parsetunneledtraffic status` **Sample Output:** `intruShell@john> show parsetunneledtraffic status` `Tunneling Status : Enabled` **Applicable to:** NS-series and Virtual IPS Sensors. For Virtual Security System instances, this command is available in debug mode.