---
title: "show parsetunneledtraffic status"
slug: "show-parsetunneledtraffic-status"
tags: ["Product Usage", "IPS 10.1.10"]
updated: 2026-10-05T15:41:06Z
published: 2026-10-05T15:41:06Z
canonical: "docs.trellix.com/show-parsetunneledtraffic-status"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# show parsetunneledtraffic status
Use the show parsetunneledtraffic status CLI command to know the current status of tunneling configuration.
This command has no parameters.
To enable or disable the tunneling configuration of a Sensor, use the set parsetunneledtraffic command. For more information on tunneling configuration, see Trellix Intrusion Prevention System Product Guide
**Syntax:**
show parsetunneledtraffic status
**Sample Output:**
intruShell@john> show parsetunneledtraffic status
Tunneling Status : Enabled
**Applicable to:**
NS-series and Virtual IPS Sensors. For Virtual Security System instances, this command is available in debug mode.