--- title: "show pktcapture status" slug: "show-pktcapture-status-6" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:07Z published: 2026-11-19T12:30:07Z canonical: "docs.trellix.com/show-pktcapture-status-6" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show pktcapture status This CLI command displays the packet capture status and configuration. > [!NOTE] > Note > > If you observe any errors or memory leaks in the `show pktcapture status` command output, you must tune the packet capture filters. If the `Frontend Packet Capture Mbuf Clone Error Cnt` is non-zero and increasing, you must reboot the Sensor. **Syntax:** `show pktcapture status` **Sample Output:** Normal mode: `IntruShell@Test-Sensor#> show pktcapture status` `Packet Capture Status :Not Running` `Send Captured Packets To :Manager` `Packet Capture Rule Set File Status :Present` `Packet Capture File Status :PCAP File Not Present` `Total Packet Capture Count :0` `File Max Size :100 MB` Debug mode: `IntruDbg#> show pktcapture status` `Packet Capture Status :Running` `Send Captured Packets To :Manager` `Packet Capture Rule Set File Status :Not Present` `Packet Capture File Status :PCAP File Not Present` `Datapath 0 :` `l7ae Egress matched pkt sent cnt :13693` `l7ae Egress pkt clone err cnt :0` `l7ae Egress pkt chain err cnt :0` `l7ae Egress pkt capture enable cnt :0` `l7ae Egress pkt capture disable cnt :0` `l7ae Egress Jumbo pkt skip cnt :0` ..... `Datapath 15 :` `l7ae Egress matched pkt sent cnt :171626` `l7ae Egress pkt clone err cnt :0` `l7ae Egress pkt chain err cnt :0` `l7ae Egress pkt capture enable cnt :0` `l7ae Egress pkt capture disable cnt :0` `l7ae Egress Jumbo pkt skip cnt :0` `Across All datapaths` `l7ae Egress matched pkt sent cnt :1788707` `l7ae Egress pkt clone err cnt :0` `l7ae Egress pkt chain err cnt :0` `l7ae Egress Jumbo pkt skip cnt :0` `Frontend Egress Matched Pkt Sent Cnt :174147703` `Frontend Ingress Matched Pkt Sent Cnt :175939455` `Frontend Ingress Pkt Capture Jumbo Frames Skip Cnt :0` `Frontend Egress Pkt Capture Jumbo Frames Skip Cnt :0` `Frontend Packet Capture Mbuf Clone Error Cnt :0` `Frontend Packet Capture Mbuf Chain Error Cnt :0` `Frontend Packet Capture Enable Count :0` `Frontend Packet Capture Disable Count :0` `Total Packet Capture Count :327136912` `File Max Size :100 MB` This command displays the following additional counters in debug mode: - **l7ae Egress matched pkt sent cnt** - Number of matched incoming packets that are sent from each backend processor to the packet capture process - **l7ae Egress pkt clone err cnt** - Number of clone errors for outgoing packets on each backend processor - **l7ae Egress pkt chain err cnt** - Number of mbuf chain errors encountered for outgoing packets - **l7ae Egress pkt capture enable cnt** - Number of times the packet capture filter is applied for each backend processor - **l7ae Egress pkt capture disable cnt** - Number of times the packet capture filter is removed from each backend processor - **Frontend Ingress Matched Pkt Sent Cnt** - Number of matched incoming packets that are sent to packet capture process from frontend processor - **Frontend Egress Matched Pkt Sent Cnt** - Number of matched outgoing packets sent to packet capture process from frontend processor - **Frontend Packet Capture Mbuf Clone Error Cnt** - Number of mbuf clone errors - **Frontend Packet Capture Mbuf Chain Error Cnt** - Number of mbuf chain error - **Frontend Packet Capture Enable Count** - Number of times the packet capture filter is applied for frontend processor - **Frontend Packet Capture Disable Count** - Number of times the packet capture filter is removed from frontend processor **Applicable to:** NS-series Sensors