This command displays the status of the pluggable module(s) inserted into the specified slot(s) located within the chassis front panel.
Syntax:
show pluggable-module (g1|g2|g5|g6|all)
Sample output:
intruShell@NS9300-Bohol2> show pluggable-module g2
[Port Module G2 ]
Module System Type : 8-port SFP+
Supported Speeds : 10Gbps/1Gbps
Module Status : Active
Total Ports : 8
Applicable to:
NS7x00 and NS9x00 Sensors