--- title: "show policymgr interfaces" slug: "show-policymgr-interfaces" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:13Z published: 2026-08-04T17:23:13Z canonical: "docs.trellix.com/show-policymgr-interfaces" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show policymgr interfaces Displays the current policy for interfaces on the appliance. ### Syntax ``` show policymgr interfaces ``` ### Parameters None ### Example The example shows the current policy for interfaces on a Network Security model with four interface pairs. ``` hostname # show policymgr interfaces Policy enabled: yes Interface A  Active      : yes  op mode     : block (enforcing)  fail-safe   : close  policy      : mixed  tolerance   : 1  Ports       : pether3  pether4  QinQ        : no  QinQ-evet   : 0x88a8  Mirror:    Non-SSL   : yes    SSL       : yes  TCP Port : 456  vlan : 545    Port      : pether9 Interface B  Active      : yes  op mode     : block (enforcing)  fail-safe   : close  policy      : mixed  tolerance   : 1  Ports       : pether5  pether6  QinQ        : no  QinQ-evet   : 0x88a8  Mirror:    Non-SSL   : no    SSL       : no    Port      : Interface C  Active      : yes  op mode     : tap (tapping)  fail-safe   : close  policy      : mixed  tolerance   : 1  Ports       : pether7  pether8  QinQ        : no  QinQ-evet   : 0x88a8  Mirror:    Non-SSL   : no    SSL       : no    Port      : Interface D  Active      : yes  op mode     : tap (tapping)  fail-safe   : close  policy      : mixed  tolerance   : 1  Ports       : pether9  pether10  QinQ        : no  QinQ-evet   : 0x88a8  Mirror:    Non-SSL   : no    SSL       : no    Port      : ``` ### User role Admin, Operator, or Monitor ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Before Release 6.4. The `mirror-port` output field was added in Release 7.7 to display mirror ports that are configured to receive a copy of traffic from monitoring interfaces, and then forward that traffic to another analysis device. The `mirror-port` output field was replaced with the `mirror` output fields in Release 8.3 to display port mirroring for all traffic types (including SSL encrypted traffic) and SSL decryption mirroring.