--- title: "show policymgr networks" slug: "show-policymgr-networks" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:13Z published: 2026-08-04T17:23:13Z canonical: "docs.trellix.com/show-policymgr-networks" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show policymgr networks Displays the configuration of the network whitelist. ### Syntax ``` show policymgr networks ``` ### Parameters None ### Output fields The following table describes the output fields for the `show policymgr networks` command. Fields are listed in the approximate order in which they appear in the output. | Field | Description | | --- | --- | | Whitelist Entries | Number of network entries on the whitelist. You can add up to 256 network whitelist entries. | | VLAN | VLAN identification number on the network whitelist. The default value is "ALL". The range is from 1 to 4094. | | INTF | Interface that is added to the network whitelist. When you apply interface A, traffic entering the Network Security appliance on pether3 and pether4 is whitelisted. When you apply interface B, traffic entering the Network Security appliance on pether5 and pether6 is whitelisted. The following interfaces are available: - For the Trellix NX 10000 models: ALL or A. - For all other Trellix models: ALL, A, B, B1, or B2. | | Monitor | Whether traffic is monitored and allowed from the specified host, network, or VLAN. | | IP | IP address that matches the defined IP address or mask. | | MODE(source\|destination\|host) | The mode that is configured for a network whtielist. | ### Example The following example displays the configuration of a whitelist. ``` hostname (config) # show policymgr networks Whitelist Entries: 3 / 256 Whitelist: VLAN INTF MONITOR IP MODE(source|destination|host) ALL ALL no 1.1.1.1/32 host ALL ALL n/a 23.1.1.1/32 src ALL ALL n/a 23.1.1.2/32 dst ``` ### User role Administrator, Monitor, or Analyst ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.0. The command output was enhanced to include a total of 256 rule entries in Release 8.0.