--- title: "show policymgr ssl-intercept network" slug: "show-policymgr-ssl-intercept-network" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:13Z published: 2026-08-04T17:23:13Z canonical: "docs.trellix.com/show-policymgr-ssl-intercept-network" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show policymgr ssl-intercept network Displays the status of the network policy rules configuration for SSL interception. For details about how to configure SSL interception, see the "Configuring SSL Interception" chapter of the Network Security User Guide. ### Syntax ``` show policymgr ssl-intercept network ``` ### Parameters None. ### Output fields The following table describes the output fields for the `show policymgr ssl-intercept network` command. Fields are listed in the approximate order in which they appear in the output. | Field | Description | | --- | --- | | Total CIDR Rule Supported | Total number of rules that are supported for the network policy in CIDR format. | | Total CIDR Rule Configured | Total number of rules that are added to the network policy in CIDR format. | | INTF | Network port pair designation (A through F) that is configured on the appliance interface. If all the network port pairs are configured, `ALL` is displayed. | | IP | IPv4 source or destination address and mask in CIDR notation. If any IPv4 address and mask for the network port pair will be watched, `any` is displayed. | | ACTION | Action to perform on traffic matching the network policy rule. - decrypt—Decrypt HTTPS traffic matching the rule. This is the default action for the network policy rule. - pass-through—Bypass traffic that matches the rule. | ### Example The following example displays the status of the network policy rules configuration for SSL interception. ``` hostname # show policymgr ssl-intercept network Total CIDR Rule Supported: 512 Total CIDR Rule Configured: 3 INTF     IP              ACTION A       ANY            decrypt B   11.14.32.0/24      decrypt A   12.23.22.0/24    pass-through ``` ### User role Administrator, Monitor, or Analyst ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.2.1. The command output was modified to display a total of 512 network policy rules in Release 8.3.2.