When executed, this CLI command displays the Sensor power supply information.
Syntax:
show powersupply
Sample output for NS3600 Sensor with chassis version 0.1:
intruShell@NS3600> show powersupply ==== PSU Status ==== PSU Model: FSP300-50RFB PSU Firmware: 001 Vin: 230.00 V Vout: 12.14 V Iout: 5.64 A Pin: 92.00 W Pout: 83.00 W Ambient Temp: 30.00 C PSU1 Temp: 33.00 C PSU2 Temp: 25.00 C Fan Speed: 3148 rpm Status: OK Vout Status: OK Iout Status: OK Temp Status: OK Power Supply PRESENT health = OK
Sample output for NS3600 Sensor with chassis version 0.0:
intruShell@NS3600> show powersupply Power Supply PRESENT health = OK
Sample output for other NS-series Sensors:
intruShell@john> show powersupply
Power Supply (A) : Present : health = OK
Power Supply (B) : Present : health = NOPOWER
Applicable to:
NS-series Sensors