show radius

Displays information about the RADIUS servers configured on the appliance.

Syntax

show radius

Parameters

None

Example

The following example displays RADIUS server settings.

hostname # show radius
RADIUS Settings: 
    Authentication and Authorization are enabled in AAA configuration.

RADIUS defaults:
    Key:               ********
    Timeout:           3
    Retransmit:        1
RADIUS servers:
   192.168.1.2:1812
      Enabled:         yes
      Key:             ********
      Timeout:         3 (default)
      Retransmit:      2
   fdd3:c75:345::8a4:1812
      Enabled:         yes
      Key:             ********
      Timeout:         3 (default)
      Retransmit:      1 (default)
   172.16.1.1:1645     
      Enabled:         yes
      Key:             ********
      Timeout:         5 
      Retransmit:      1 (default)
   172.16.1.1:1812
      Enabled:         yes
      Key:             ********
      Timeout:         3 (default)
      Retransmit:      1 (default)        

User role

Monitor, Operator, or Admin

Command mode

Enable

Supported appliances

This command was released as follows: