This command displays the operation status of both SSDs in Trellix Intrusion Prevention System operating in RAID1 mode.
Note
RAID is not supported on NS9600, NS7600, NS7500, NS7x50, NS7x00, NS5x00, NS3600, and NS3x00 Sensors.
Syntax:
show raid status
Sample output:
intruShell@NS9300-Bohol2> show raid status
SSD 0 STATUS : good
SSD 1 STATUS : good
NS9300 Secondary SSD 0 STATUS : good
NS9300 Secondary SSD 1 STATUS : good
Applicable to:
NS9500, NS9300, NS9200, and NS9100 Sensors