--- title: "Show Rsyslog configuration settings using the CLI" slug: "show-rsyslog-configuration-settings-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:26Z published: 2026-09-12T20:42:26Z canonical: "docs.trellix.com/show-rsyslog-configuration-settings-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Show Rsyslog configuration settings using the CLI Use the CLI `show fenotify rsyslog` command in this topic to verify the configuration settings for rsyslog notifications. To configure `rsyslog` notifications using the CLI, see System Log Notifications. **To show rsyslog configuration settings:** 1. Go to the CLI enable mode: ``` hostname > enable ``` 2. Enter the command `show fenotify rsyslog`: ``` hostname # show fenotify rsyslog ``` ### Prerequisites - Administrator or Operator access to the appliance Example The following tables list an example of `rsyslog` configuration settings. As shown below, the settings are divided into three groups: ``` hostname # show fenotify rsyslog ``` `Configuration:` | Parameter | Value | Description | | --- | --- | --- | | `Protocol Enabled` | `yes` | Enable rsyslog notification | | `default-delivery` | `per-event` | Send a notification after each alert event by default | | `default-format` | `cef` | Use the CEF format by default | | `default-protocol` | `udp` | Protocol used to send rsyslog notifications by default | | `default-send-as` | `warning` | All notifications are set at the warning severity by default | `Alerts:` | Parameter | Value | Description | | --- | --- | --- | | `domain-match` | `yes` | Enable logging of domain-match alert types | | `infection-match` | `yes` | Enable logging of infection-match alert types | | `ips-event` | `yes` | Enable logging of ips-event alert types | | `malware-callback` | `yes` | Enable logging of malware-callback alert types | | `malware-object` | `yes` | Enable logging of malware-object alert types | | `riskware-callback` | `yes` | Enable logging of riskware-callback alert types | | `riskware-infection` | `yes` | Enable logging of riskware-infection alert types | | `riskware-object` | `yes` | Enable logging of riskware-object alert types | | `smartvision-event` | `no` | Disable logging of smartvision-event alert types | | `web-infection` | `yes` | Enable logging of web-infection alert types | `Consumers:``nx2500` | Parameter | Value | Description | | --- | --- | --- | | `enabled` | `yes` | Enable rsyslog notification for this consumer | | `prefer-message-send-as` | `alert` | All notifications are set at the alert severity for this consumer |