--- title: "show sensor-load" slug: "show-sensor-load-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:07Z published: 2026-11-19T12:30:07Z canonical: "docs.trellix.com/show-sensor-load-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show sensor-load This `show sensor-load` command shows you the following information: - Average of load (traffic) seen on all processing elements - Maximum of load (traffic) seen on a single processing element **Syntax:** `show sensor-load` **Sample Output:** On executing the command, the following messages are displayed: - When the Sensor-load in ON `intruShell@john> show sensor-load` `Average load across all PEs : 0% (approx.)` `Maximum load on a single PE : 0% (approx.)` - When the Sensor-load is OFF `CPU usage tracking is currently disabled. It can be enabled on the Advanced Device Settings page of the Manager GUI.` **Applicable to:** NS-series Sensors