---
title: "show sensor-load"
slug: "show-sensor-load"
tags: ["Product Usage", "IPS 10.1.10"]
updated: 2026-10-05T15:41:06Z
published: 2026-10-05T15:41:06Z
canonical: "docs.trellix.com/show-sensor-load"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# show sensor-load
This show sensor-load command shows you the following information:
- Average of load (traffic) seen on all processing elements
- Maximum of load (traffic) seen on a single processing element
**Syntax:**
show sensor-load
**Sample Output:**
On executing the command, the following messages are displayed:
- When the Sensor-load in ON
intruShell@john> show sensor-load
Average load across all PEs : 0% (approx.)
Maximum load on a single PE : 0% (approx.)
- When the Sensor-load is OFF
CPU usage tracking is currently disabled. It can be enabled on the Advanced Device Settings page of the Manager GUI.
**Applicable to:**
NS-series Sensors