--- title: "show sizing stats" slug: "show-sizing-stats" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:13Z published: 2026-08-04T17:23:13Z canonical: "docs.trellix.com/show-sizing-stats" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show sizing stats To view utilization statistics about your appliance, use the **show sizing stats** command in enable mode. ### Syntax ``` show sizing stats ``` ### User role Monitor, Operator, or Admin ### Supported appliances Command introduced for Network Security appliances. ### Description There are recommended levels of utilization that are specific to each Network Security appliance model. Exceeding these levels can cause reduced malware detection efficacy, packet loss, and queuing errors. The Network Security appliance continuously gathers and reports relevant data about its utilization. You can use the utilization data as a tool for future capacity planning. For more information, see the Network Security System Administration Guide. ### Parameters None ### Example As shown in the following example, this command displays the current status and value for each measurement, as well as the benchmarks from which the measurements are made. ``` hostname # show sizing stats Stat                             Status        Value        Warning           Critical                                                            Level             Level Utilization summary:             Warning       1            1                 2 Web analysis MVX utilization(%): ok            9            75                95       Total bandwidth (Mbps):          Warning       888          750               950 ```