--- title: "show smartvision alert whitelist" slug: "show-smartvision-alert-whitelist" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-02T17:27:05Z published: 2026-09-02T17:27:05Z canonical: "docs.trellix.com/show-smartvision-alert-whitelist" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show smartvision alert whitelist The `show smartvision alert whitelist` command shows the alert whitelist. Each entry in the list specifies a combination of conditions. If a event matches all conditions specified by any entry in the whitelist, the appliance does not generate an alert for that event. A alert whitelist entry can specify any combination of the following conditions: **Rule** A single rule ID. **Source Prefix** A single IPv4 or IPv6 source address, specified in classless inter-domain routing CIDR format (`<ipAddress>/<prefix>`). **Dest Prefix** A single IPv4 or IPv6 destination address specified in CIDR format. For more information, see [Managing noisy SmartVision alerts](/docs/managing-noisy-smartvision-alerts). :