--- title: "show smartvision config" slug: "show-smartvision-config-1" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:13Z published: 2026-08-04T17:23:13Z canonical: "docs.trellix.com/show-smartvision-config-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show smartvision config Displays SmartVision configuration, data exfiltration detection configuration, and SmartVision rules file version information. On SmartVision Edition appliances, which are Network Security appliances with SmartVision Edition appliance licenses SmartVision features are enabled by default. On SmartVision-capable Network Security sensors and integrated appliances, you must enable SmartVision explicitly. SmartVision appliances are described in the Network Security SmartVision Feature Guide . > [!NOTE] > Note > > You can also run this command remotely from the command line of an integrated TrellixCentral Management System appliance using the central management appliance proxying mechanism. To show only whether SmartVision and data exfiltration detection are running, you can also use the `show smartvision status` command instead. ### Syntax ``` show smartvision config ``` ### Parameters None ### Output **Detection enabled** Whether SmartVision detection is enabled: - `yes`―This is the default status for SmartVision Edition sensors. - `no`―This is the default status for SmartVision-capable Network Security sensors and integrated appliances. **Context service enabled** Whether the context service is enabled: - `yes`―This is the default status for CLI appliances. - `no`―Related Network Activity is not available for CLI alerts. **SC killswitch** Whether the SC kill switch is enabled: - `yes`―This is the default status for SmartVision Edition sensors and SmartVision-capable Network Security sensors and integrated appliances. - `no`―SC killswitch has been explicitly disabled. **Data exfil detection enabled** Whether data exfiltration detection is enabled: - `yes`―This is the default status for SmartVision Edition sensors and SmartVision-capable Network Security sensors and integrated appliances. - `no`―Data exfiltration detection has been explicitly disabled. **Beaconing detection enabled** Whether beaconing detection is enabled: - `yes`―This is the default status for SmartVision Edition sensors and SmartVision-capable Network Security sensors and integrated appliances. - `no`―Beaconing detection has been explicitly disabled. **TLS detection enabled** Whether TLS detection is enabled: - `yes`―This is the default status for SmartVision Edition sensors and SmartVision-capable Network Security sensors and integrated appliances. - `no`―TLS detection has been explicitly disabled. **DGA detection enabled** Whether DGA detection is enabled: - `yes`―This is the default status for SmartVision Edition sensors and SmartVision-capable Network Security sensors and integrated appliances. - `no`―DGA detection has been explicitly disabled. **Packet capture enabled** Whether packet capture is enabled: - `yes`―This is the default status for SmartVision Edition sensors and SmartVision-capable Network Security sensors and integrated appliances. - `no`―Packet capture has been explicitly disabled. **Packet capture backup enabled** Whether packet capture backup is enabled: - `yes`―This is the default status for SmartVision Edition sensors and SmartVision-capable Network Security sensors and integrated appliances. - `no`―Packet capture backup has been explicitly disabled. **Base version** The minimum SmartVision rules file version supported by the SmartVision rules engine. **Rule version** The SmartVision rules file version. When SmartVision alert information is sent to the Helix console, the SmartVision rules file version number is included in the JSON object. **Exfil checkpoint enabled** Whether exfiltration checkpoint is enabled: - `yes`―This is the default status for SmartVision Edition sensors and SmartVision-capable Network Security sensors and integrated appliances. - `no`―Exfiltration checkpoint has been explicitly disabled. **Data exfil detection customer networks** IP address ranges of the destination network hosts to be monitored for data theft activity. **Data exfil detection whitelist networks** The destination IP address ranges for which data exfiltration alerts are not to be generated. **Beaconing detection customer networks** IP address ranges of the destination network hosts to be monitored for beaconing activity. **Beaconing detection whitelist networks** The destination IP address ranges for which beaconing alerts are not to be generated. **DGA detection whitelist domain** The destination IP address ranges for which DGA alerts are not to be generated. ### Examples This example output shows that SmartVision and data exfiltration detection are disabled and their whitelists and the data exfiltration homenet are not configured. ``` hostname # show smartvision config SmartVision Config       Detection Enabled             : no       Context Service enabled       : yes       SC Killswitch                 : no       Data exfil detection enabled  : no       Beaconing detection enabled   : no       TLS detection enabled         : no       DGA detection enabled         : yes              Packet capture enabled        : no              Packet capture backup enabled : yes       Base version                  : 2       Rule version                  : 3       Data exfil detection customer networks:               None configured       Data exfil detection whitelist networks:               None configured       Beaconing detection whitelist networks:               None configured ``` This example shows that SmartVision and data exfiltration detection are enabled. The three SmartVision and data exfiltration detection whitelists are configured, and appliance is configured to detect data exfiltration activity on the 192.168.0.0/24 network.. ``` hostname # show smartvision config SmartVision Config       Detection Enabled             : yes       Context Service enabled       : yes       SC Killswitch                 : no       Data exfil detection enabled  : yes       Beaconing detection enabled   : no       TLS detection enabled         : no       Base version                  : 2       Rule version                  : 3       Data exfil detection customer networks:               None configured       Data exfil detection whitelist networks:               192.168.0.0/24       Beaconing detection whitelist networks:               None configured ``` ### User role Admin, Analyst, or Operator. ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.0