--- title: "show smartvision smb-stats" slug: "show-smartvision-smb-stats" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:13Z published: 2026-08-04T17:23:13Z canonical: "docs.trellix.com/show-smartvision-smb-stats" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show smartvision smb-stats Displays statistics about SMB and SMB 2 objects that a SmartVision appliance observed in traffic between compromised hosts and other hosts in the network and then submitted to the cloud MVX service or MVX cluster for inspection and analysis. SmartVision appliances are described in the Network Security SmartVision Feature Guide . > [!NOTE] > Note > > You can also run this command remotely from the command line of an integrated TrellixCentral Management System appliance using the central management appliance proxying mechanism. ### Syntax ``` show smartvision smb-stats ``` ### Parameters None ### Examples ``` hostname # show smartvision smb-stats Time:   Start: Thu Jul 13 18:44:48 2017 Capture: Mon Jul 17 03:33:28 2017 Elapsed: 4848m 40s    Poll: 58s SMB Object Statistics Total   Rate/min(avg)  Rate/min(curr)         SMB Objects               9               0               0        SMB2 Objects               3               0               0     SMB Submissions               9               0               0    SMB2 Submissions               3               0               0 ``` ### User role Admin, Analyst, or Operator. ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.0