--- title: "show smartvision status" slug: "show-smartvision-status-1" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:13Z published: 2026-08-04T17:23:13Z canonical: "docs.trellix.com/show-smartvision-status-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show smartvision status Displays the status of SmartVision, the context service, and data exfiltration detection on a SmartVision-capable appliance. On SmartVision Edition appliances, which are Network Security appliances with SmartVision Edition appliance licenses , SmartVision features are enabled by default. On SmartVision-capable Network Security sensors and integrated appliances, you must enable SmartVision explicitly. SmartVision appliances are described in the Network Security SmartVision Feature Guide . > [!NOTE] > Note > > You can also run this command remotely from the command line of an integrated TrellixCentral Management System appliance using the central management appliance proxying mechanism. To view SmartVision configuration, data exfiltration detection configuration, and SmartVision rules file version information, use the `show smartvision config` command instead. ### Syntax ``` show smartvision status ``` ### Parameters None ### Output The following table describes the output fields for the **show smartvision status** command. Fields are listed in the approximate order in which they appear in the output. | Field | Description | | --- | --- | | **Detection** | Whether SmartVision detection is enabled: - `yes`―This is the default status for SmartVision Edition sensors. - `no`―This is the default status for SmartVision-capable Network Security sensors and integrated appliances. | | **Context service** | Whether the context service is enabled: - `running`―The context service is enabled. - `unmanaged`―The context service is not enabled. | | **Data exfil detection state** | Whether data exfiltration detection is enabled: - `running`―Data exfiltration detection is enabled. - `unmanaged`―Data exfiltration detection is not enabled. | | **DGA detection state** | Whether DGA detection is enabled: - `running`―DGA detection is enabled. - `unmanaged`―DGA detection is not enabled. | | **Beaconing detection state** | Whether beaconing detection is enabled: - `running`― beaconing detection is enabled. - `unmanaged`―beaconing detection is not enabled. | | **TLS detection state** | Whether TLS detection is enabled: - `running`―TLS detection is enabled. - `unmanaged`―TLS detection is not enabled. | | **Event-Based Pcap Capture state** | Whether Event-Based Pcap Capture state is enabled: - `running`―Event-Based Pcap Capture state is enabled. - `unmanaged`―Event-Based Pcap Capture state is not enabled. | | **SmartVision Edition configured** | Whether SmartVision Edition is configured: - `yes`―SmartVision Edition is configured. - `no`―SmartVision Edition is not configured. > [!NOTE] > Note > > You can convert the Classic product edition into the SmartVision product edition using the following CLI command, `smartvision sv-mode enable`. Use the *no* version of the command to convert it back to Classic edition. > > Conversion will require a manual appliance reboot. | | **Datapath mode reboot required** | Whether Datapath mode reboot is required: - `yes`―Datapath mode reboot is required. - `no`―Datapath mode reboot is not required. | | **Current datapath mode** | Current datapath mode: - `Classic sensor` - `SmartVision-capable sensor` | | **SmartVision Edition supported** | Whether the Network Security hardware or virtual appliance is capable of operating as a SmartVision Edition sensor: - `no`―The appliance is not capable of operating as a SmartVision Edition sensor. - `yes`―The appliance is capable of operating as a SmartVision Edition sensor. | SmartVision appliances are described in the Network Security SmartVision Feature Guide ### Example In the following example, SmartVision is not enabled on a Network Security sensor and the sensor does not support SmartVision. > [!NOTE] > Note > > SmartVision-capable Network Security sensors are listed in the Network Security SmartVision Feature Guide. ``` hostname # show smartvision status SmartVision State        Detection                      : no        Context Service                : running        Data exfil detection state     : unmanaged        Beaconing detection state      : running        TLS detection state            : running        Event-Based Pcap Capture state : running        DGA detection state            : running                SmartVision Edition configured : no        Datapath mode reboot required  : no        Current datapath mode          : Classic Sensor        SmartVision Edition supported  : no ``` In the following example, SmartVision is enabled on a Network Security integrated appliance. > [!NOTE] > Note > > SmartVision-capable Network Security integrated appliances are listed in the Network Security SmartVision Feature Guide. ``` hostname # show smartvision status SmartVision State        Detection                      : yes        Context Service                : running        Data exfil detection state     : running        Beaconing detection state      : running        TLS detection state            : running        Event-Based Pcap Capture state : running        DGA detection state            : running        SmartVision Edition configured : yes        Datapath mode reboot required  : yes        Current datapath mode          : Classic Sensor        SmartVision Edition supported  : yes ``` ### User role Admin, Analyst, or Operator. ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.0