--- title: "show ssl config" slug: "show-ssl-config-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:07Z published: 2026-11-19T12:30:07Z canonical: "docs.trellix.com/show-ssl-config-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show ssl config The `show ssl config` command displays the configuration details for SSL on the Sensor. This command has no parameters. Information displayed by the `show ssl config` command includes the following: - Whether SSL will be enabled the next time the Sensor reboots, and how many SSL flows will be supported - Whether SSL decryption is currently active and how many SSL flows are supported - How long the session is kept alive after the connection associated with that session ends (default is 5 minutes) - Whether the packet logging is enabled for attacks detected in an SSL tunnel - Whether SSL decryption keys are present on the Sensor - The number of SSL decryption keys present **Syntax:** `show ssl config` **Sample Output:** `intruShell@john> show ssl config` `[SSL Decryption Support]` `Requested : no` `Supported : Inbound (200000 flows)` `[Inbound]` `SSL Session Lifetime : 5 min` `SSL Pkt Logging : disabled` `SSL Shared Key Decrypt : enabled` `[SSL Decryption Keys]` `Present : no` **Applicable to:** NS-series Sensors