--- title: "show ssl config" slug: "show-ssl-config" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:41:06Z published: 2026-10-05T15:41:06Z canonical: "docs.trellix.com/show-ssl-config" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show ssl config The show ssl config command displays the configuration details for SSL on the Sensor. This command has no parameters. Information displayed by the show ssl config command includes the following: - Whether SSL will be enabled the next time the Sensor reboots, and how many SSL flows will be supported - Whether SSL decryption is currently active and how many SSL flows are supported - How long the session is kept alive after the connection associated with that session ends (default is 5 minutes) - Whether the packet logging is enabled for attacks detected in an SSL tunnel - Whether SSL decryption keys are present on the Sensor - The number of SSL decryption keys present **Syntax:** show ssl config **Sample Output:** intruShell@john> show ssl config [SSL Decryption Support] Requested : no Supported : Inbound (200000 flows) [Inbound] SSL Session Lifetime : 5 min SSL Pkt Logging : disabled SSL Shared Key Decrypt : enabled [SSL Decryption Keys] Present : no **Applicable to:** NS-series Sensors