--- title: "show ssl stats" slug: "show-ssl-stats" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:41:06Z published: 2026-10-05T15:41:06Z canonical: "docs.trellix.com/show-ssl-stats" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show ssl stats This CLI command displays SSL decryption statistics for the Sensor. SSL decryption is enabled in one direction at a given point of time. The command displays SSL statistics for the direction in which the decryption is enabled. **Syntax:** show ssl stats <inbound|outbound> **Applicable to:** NS-series Sensors ## Inbound SSL Decryption When SSL decryption is enabled only for RSA ciphers, the following information is displayed: - The names of any certificates loaded into the Manager, and how many times they have been used in sessions since the Sensor was last rebooted. - The number of certificates passed for which the Sensor had no matching certificates When SSL decryption is enabled for DHE/ECDHE ciphers that includes RSA ciphers as well, the following information is displayed: - Number of SSL records processed by the Sensor - Number of matched shared SSL keys - Number of Active SSL Agent connections for IPv4 and IPv6 IP addresses **Syntax:** show ssl stats inbound known-key **Sample output:** No Certs are present [Certs Matched] Number of certs Mismatched : 822 Number of SSL records processed by SSL module : 4998793 Matched SSL Shared Keys : 12 Total SSL Shared Keys : 79 Active SSL Agent connections(v4) : 81 Active SSL Agent connections(v6) : 0 Total SSL Agent connections(v4) : 87 Total SSL Agent connections(v6) : 0 **Applicable to:** When using only RSA ciphers: NS-series Sensors When using DHE/ECDHE ciphers: NS9500, NS9x00, NS7500, NS7x00 and NS5x00 series Sensors When SSL decryption is enabled using proxy, the following information is displayed: - Name of the Certificate - Number of times the certificate was used - Number of times decryption was bypassed **Syntax:** show ssl stats inbound proxy <cpu|exceptions|port|sessions|sslinfo|status> | Parameter | Description | | --- | --- | | cpu | Displays the CPU utilization for the last 1, 4, and 64 seconds | | port | Displays the statistics for the configured VLAN ports | | sessions | Displays the number of sessions per port | | sslinfo | Displays the statistics for the SSL connection, such as handshake, session information, and so on | | status | Displays if SSL decryption is configured and enabled | **Sample output:** intruShell@john-9500> show ssl stats inbound proxy status Decryption configured: yes Decryption enabled: yes Decryption engine ready: yes Engine provisioning status: (requested=yes ; done=yes) **Applicable to:** NS9500 and NS7500 Sensors only ## Outbound SSL Decryption The command displays the following information when outbound SSL decryption is enabled: | Parameter | Description | | --- | --- | | cpu | Displays the CPU utilization for the last 1, 4, and 64 seconds | | exceptions | Displays the status for the exceptions added to the URL allow list | | port | Displays the statistics for the configured VLAN ports | | sessions | Displays the number of sessions per port | | sslinfo | Displays the statistics for the SSL connection, such as handshake, session information, and so on | | status | Displays if SSL decryption is configured and enabled | **Syntax:** show ssl stats outbound proxy <cpu|exceptions|port|sessions|sslinfo|status> **Sample output:** intruShell@Perf_7200> show ssl stats outbound proxy status Decryption configured: yes Decryption enabled: yes Decryption engine ready: yes Engine provisioning status: (requested=yes ; done=yes) **Applicable to:** NS9500, NS9100, NS9200, NS7500, NS7300, and NS7200 Sensors