show tacacs

Displays information about the TACACS+ servers configured on the appliance.

Syntax

show tacacs

Parameters

None

Example

The following example displays TACACS+ server settings. In this example, the tacacs-server retransmit 2 command was used to set a global value for the retransmit setting, which also changed the default setting from 1 to 2.

hostname (config) # show tacacs
TACACS+ defaults:
    Key:               ********
    Timeout:           3
    Retransmit:        2
TACACS+ servers:
   192.168.1.1:49
      Enabled:     yes
      Auth Type:   ascii
      Key:         ********
      Timeout:     5 
      Retransmit:  2 (default)
   192.168.1.3:49
      Enabled:     yes
      Auth Type:   pap
      Key:         ********
      Timeout:     3 (default)
      Retransmit:  2 (default)
   192.168.1.3:442
      Enabled:     yes
      Auth Type:   pap
      Key:         ********
      Timeout:     3 (default)
      Retransmit:  1 
   192.168.1.3:43
      Enabled:     yes
      Auth Type:   pap
      Key:         ********
      Timeout:     3 (default)
      Retransmit:  2 (default)

User role

Monitor, Operator, or Admin.

Command mode

Enable

Supported appliances

This command is supported on the following appliances running the specified releases or later: