--- title: "show tacacs" slug: "show-tacacs-4" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:07Z published: 2026-11-19T12:30:07Z canonical: "docs.trellix.com/show-tacacs-4" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show tacacs This CLI command displays the current TACACS+ configuration for the Sensor. Information displayed by the `show tacacs` command includes the following: - Whether TACACS+ remote authentication for Sensor CLI users is enabled (on) - Whether encryption of the TACACS+ traffic is enabled - Whether the TACACS+ authorization feature is enabled - The IP address of the configured TACACS+ server(s), if any This command has no parameters. **Syntax:** `show tacacs` **Sample Output:** `intruShell@john> show tacacs` `[TACACS+ Config]` `Authentication : Enable` `Traffic Encryption : Enable` `Authorization : Enabled` `Server 1 IP : 10.213.172.87` **Applicable to:** NS-series Sensors