---
title: "show tacacs"
slug: "show-tacacs"
tags: ["Product Usage", "IPS 10.1.10"]
updated: 2026-10-05T15:41:06Z
published: 2026-10-05T15:41:06Z
canonical: "docs.trellix.com/show-tacacs"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# show tacacs
This CLI command displays the current TACACS+ configuration for the Sensor.
Information displayed by the show tacacs command includes the following:
- Whether TACACS+ remote authentication for Sensor CLI users is enabled (on)
- Whether encryption of the TACACS+ traffic is enabled
- Whether the TACACS+ authorization feature is enabled
- The IP address of the configured TACACS+ server(s), if any
This command has no parameters.
**Syntax:**
show tacacs
**Sample Output:**
intruShell@john> show tacacs
[TACACS+ Config]
Authentication : Enable
Traffic Encryption : Enable
Authorization : Enabled
Server 1 IP : 10.213.172.87
**Applicable to:**
NS-series Sensors