--- title: "show tapsender health" slug: "show-tapsender-health" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:13Z published: 2026-08-04T17:23:13Z canonical: "docs.trellix.com/show-tapsender-health" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show tapsender health Displays the following health states of the Evidence Collector module: - **Authenticated**—The Evidence Collector has been authenticated with TAP and is in the process of connecting to the VPC within an AWS endpoint. - **Authentication Failure**—The Evidence Collector failed to authenticate itself with TAP because either communication failed or the client certificate expired. - **Connected**—The Evidence Collector is connected to the VPC within an AWS endpoint and is sending the network event logs. - **Failure**—The Evidence Collector failed to connect to the VPC within an AWS endpoint. - **Not Authenticated**—The Evidence Collector is in the process of authenticating itself to TAP. > [!NOTE] > Note > > TAP integration is not supported on the NX x3xx appliances and the NX 10000 appliance. ### Syntax ``` show tapsender health ``` ### Parameters None ### Example The following example shows that the Evidence Collector has been authenticated with TAP and is in the process of connecting to the VPC within an AWS endpoint: ``` hostname # show tapsender health Authenticated ``` ### User role Administrator or Operator ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 7.9