This command displays the status of the pluggable module(s) inserted into the specified slot(s) of transceiver.
Syntax:
show transceiver serial-number (g0/1|g0/2|g1/1|g1/2|g1/3|g1/4|g1/5|g1/6|g1/7|g1/8|g1/9|g1/10|g1/11|g1/12|g2/1|g2/2|g2/3|g2/4|g2/5|g2/6|g2/7|g2/8|g2/9|g2/10|g2/11|g2/12|g3/1|g3/2|g3/3|g3/4|g3/5|g3/6|g3/7|g3/8|WORD|all)
Sample Output:
intruShell@john> show transceiver serial-number all
--------------------------
Slot-0 [FIXED MODULE : 2-port QSFP]
G0/1 : Transceiver is Absent.
G0/2 : Transceiver is Absent.
--------------------------
Slot-1 [empty]
--------------------------
Slot-2 [empty]
--------------------------
Slot-3 [FIXED MODULE : 8-port RJ45]
Not Applicable
Note
For RJ-45 module, serial number is not applicable.
Applicable to:
NS5x00, NS7x00 and NS9x00 Sensors