show userconfigvolumedosthreshold

Prev Next

This command displays the specified user-defined DoS threshold for alerting on volume for a particular packet type.

Syntax:

show userconfigvolumedosthreshold <dos-measure-name> <direction>

Parameter Description
<dos-measure-name> Indicates the DoS measure name: one of 'tcp-syn', 'tcp-syn-ack', 'tcp-fin', 'tcp-rst', 'udp', 'icmp-echo', 'icmp-echo-reply', 'icmp-non-echo-reply', 'ip-fragment', 'non-tcp-udp-icmp'
<direction> Indicates the direction. It can be 'inbound' or 'outbound'.
Sample Output:

intruShell@Sensor-6050> show userconfigvolumedosthreshold icmp-echo-reply inbound

User did not configure threshold for icmp-echo-reply inbound

Example:

show userconfigvolumedosthreshold icmp-echo-reply inbound returns one of the following responses:

  • The threshold value configured using set userconfigvolumedosthreshold icmp-echo-reply inbound
  • If the threshold was not configured, the message User did not configure threshold for icmp-echo-reply inbound
Applicable to:

NS-series Sensors