--- title: "show userconfigvolumedosthreshold" slug: "show-userconfigvolumedosthreshold-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:20Z published: 2026-11-19T12:30:20Z canonical: "docs.trellix.com/show-userconfigvolumedosthreshold-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show userconfigvolumedosthreshold This command displays the specified user-defined DoS threshold for alerting on volume for a particular packet type. **Syntax:** `show userconfigvolumedosthreshold <dos-measure-name> <direction>` | Parameter | Description | | --- | --- | | | Indicates the DoS measure name: one of 'tcp-syn', 'tcp-syn-ack', 'tcp-fin', 'tcp-rst', 'udp', 'icmp-echo', 'icmp-echo-reply', 'icmp-non-echo-reply', 'ip-fragment', 'non-tcp-udp-icmp' | | | Indicates the direction. It can be 'inbound' or 'outbound'. | **Sample Output:** `intruShell@Sensor-6050> show userconfigvolumedosthreshold icmp-echo-reply inbound` `User did not configure threshold for icmp-echo-reply inbound` **Example:** `show userconfigvolumedosthreshold icmp-echo-reply inbound` returns one of the following responses: - The threshold value configured using `set userconfigvolumedosthreshold icmp-echo-reply inbound` - If the threshold was not configured, the message *User did not configure threshold for icmp-echo-reply inbound* **Applicable to:** NS-series Sensors