This command displays the specified user-defined DoS threshold for alerting on volume for a particular packet type.
Syntax:
show userconfigvolumedosthreshold <dos-measure-name> <direction>
Parameter | Description |
|---|---|
<dos-measure-name> | Indicates the DoS measure name: one of 'tcp-syn', 'tcp-syn-ack', 'tcp-fin', 'tcp-rst', 'udp', 'icmp-echo', 'icmp-echo-reply', 'icmp-non-echo-reply', 'ip-fragment', 'non-tcp-udp-icmp' |
<direction> | Indicates the direction. It can be 'inbound' or 'outbound'. |
Sample Output:
intruShell@Sensor-6050> show userconfigvolumedosthreshold icmp-echo-reply inbound
User did not configure threshold for icmp-echo-reply inbound
Example:
show userconfigvolumedosthreshold icmp-echo-reply inbound returns one of the following responses:
The threshold value configured using
set userconfigvolumedosthreshold icmp-echo-reply inboundIf the threshold was not configured, the message User did not configure threshold for icmp-echo-reply inbound
Applicable to:
NS-series Sensors