--- title: "show usernames network" slug: "show-usernames-network" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:13Z published: 2026-08-04T17:23:13Z canonical: "docs.trellix.com/show-usernames-network" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # show usernames network Shows the network information that is configured for the user accounts. > [!NOTE] > Note > > For users with the Analyst and Auditor roles, this command only returns information about their own accounts. > > Some user accounts are used internally and are not configurable. > > A user with a *reject* user account is automatically locked out and is not associated with a role by default. ### Syntax `show usernames network` ``` show usernames network ``` ### Parameters None ### Output fields The following table describes the output fields of the `show usernames network` command. | Field | Description | | --- | --- | | USERNAME | Name with which the user logs in to the appliance. | | FULL NAME | Full name of the specified user. | | VLAN | Virtual Local Area Network (VLAN) identifier that is configured for the user account (if applicable). | | SUBNET | Network portion of the IP address that is configured for the user account (if applicable). | ### Example The following example shows the configured network information for the current user accounts. ``` hostname # show usernames network USERNAME    FULL NAME               VLAN   SUBNET admin       System Administrator amy         Amy Johnson analysis    Malware Analysis User cmcrendv    CMC Rendezvous User jose        Jose Garcia                    10.1.1.0/24                           monitor     System Monitor operator    System Operator reject      Reject User ``` ### User role Admin, Operator, Monitor, Analyst, Auditor, api_analyst, api_monitor, or fe_services. ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Before Release 7.5.0 - **Central Management System:** Before Release 7.5.0 - **EX Series:** Before Release 7.6.0 - **Malware Analysis:** Before Release 7.7.0 - **File Protect:** Before Release 7.7.0