--- title: "Signature or software update status" slug: "signature-or-software-update-status-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:28:23Z published: 2026-11-19T12:28:23Z canonical: "docs.trellix.com/signature-or-software-update-status-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Signature or software update status To see if your Sensor successfully received a signature update or software upgrade, you can use the `status` command as shown in the following procedure, or the `downloadstatus` command, described later in this chapter. To use the `status` command: 1. On the Sensor, type `status` at the command prompt before updating the signature set on the Sensor. Note the signature version. 2. Update the signature set on the Sensor using the Manager screens. 3. On the Sensor, again type `status` at the command prompt after the update from Manager is complete. Verify that the signature version number has incremented. The new signature version should match with the signature set version that has been updated from the Manager and applied to the Sensor.