--- title: "Single-interface WAN configuration" slug: "single-interface-wan-configuration-1" tags: ["Central Management System", "Install and Get Started"] updated: 2026-10-01T11:43:07Z published: 2026-10-01T11:43:12Z canonical: "docs.trellix.com/single-interface-wan-configuration-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Single-interface WAN configuration This configuration uses a single interface, so only the default HA interface is configured. IP routing is required, because the two nodes are in different subnets. - [Configuring the single-interface WAN option using the wizard](/network-and-platform/docs/configuring-the-single-interface-wan-option-using-the-wizard-1) - [Configuring the single-interface WAN option using the CLI](/network-and-platform/docs/configuring-the-single-interface-wan-option-using-the-cli-1) ### Prerequisites - Admin access - Requirements listed in [Basic requirements](/network-and-platform/docs/system-requirements-3#basic_requirements) - Firewall rules and default HA interface static route requirements listed in [WAN deployment requirements](/network-and-platform/docs/system-requirements-3#wan_deployment_requirements) :