Sets the DGA alert threshold interval to between 0 and 3600 seconds.
Syntax
smartvision dga-detect alert-threshold-intv<seconds>
Parameters
seconds
Enter an integer between 0 and 3600 to set the DGA alert threshold interval in seconds.
Example
The following example Sets the DGA alert threshold interval at 250 seconds:
hostname (config) # smartvision dga-detect alert-threshold-intv<250>
User role
Admin
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Central Management System: Release 10.0
Network Security: Release 10.0