--- title: "smartvision event-track asym-flow enable" slug: "smartvision-event-track-asym-flow-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:31Z published: 2026-08-04T17:22:31Z canonical: "docs.trellix.com/smartvision-event-track-asym-flow-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # smartvision event-track asym-flow enable > [!NOTE] > Note > > This command was deprecated in Release 9.1.0. Enables collection of asymmetric traffic flow statistics. This feature is disabled by default. > [!WARNING] > Important > > Enable this feature only while collecting statistics needed to investigate a high percentage of asymmetric flows in the network. The statistics cache is automatically cleared when the collection of asymmetric traffic flow statistics is enabled. > [!NOTE] > Note > > You can also run this command remotely from the command line of an integrated TrellixCentral Management System appliance using the central management appliance proxying mechanism. ### Syntax `[no] smartvision event-track asym-flow enable` ### Parameters `no` Use the `no` form of this command on a Network Security appliance to disable statistics collection for asymmetric flow events. ### Examples The following command enables the appliance to collect statistics for asymmetric traffic flow events. ``` hostname (config) # smartvision event-track asym-flow enable ``` The following command disables collection of asymmetric traffic flow statistics. ``` hostname (config) # no smartvision event-track asym-flow enable ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.1.2. This command was deprecated in Release 9.1.0.