--- title: "smartvision exfil enable" slug: "smartvision-exfil-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:31Z published: 2026-08-04T17:22:31Z canonical: "docs.trellix.com/smartvision-exfil-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # smartvision exfil enable Enables data exfiltration (data theft) detection on a SmartVision appliance. When data exfiltration detection is enabled, the appliance detects data theft activity in traffic sent from specified internal networks. SmartVision is enabled by default on SmartVision Edition appliances and SmartVision-capable Network Security sensors and integrated appliances. SmartVision appliances are described in the Network Security SmartVision Feature Guide . > [!NOTE] > Note > > You can also run this command remotely from the command line of an integrated Trellix Central Management System appliance using the central management appliance proxying mechanism. To view the configuration settings and runtime status for SmartVision and data exfiltration detection, use the following commands: - `show smartvision config` - `show smartvision status` ### Syntax `[no] smartvision exfil enable` ### Parameters `no` Use the `no` form of this command to disable detection of data exfiltration. ### Examples The following command explicitly disables data exfiltration detection. ``` hostname (config) # no smartvision exfil enable ``` The following command re-enables data exfiltration detection after it has been explicitly disabled. ``` hostname (config) # smartvision exfil enable ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.0