--- title: "smartvision sv-mode enable" slug: "smartvision-sv-mode-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:31Z published: 2026-08-04T17:22:31Z canonical: "docs.trellix.com/smartvision-sv-mode-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # smartvision sv-mode enable Enables SmartVision edition on a Classic edition Network Security appliance. The Classic edition Network Security appliance should support SmartVision mode. A reboot is required for the changes to take effect. > [!NOTE] > Note > > A SmartVision licensed Network Security appliance cannot be disabled using this CLI command. ### Syntax `[no]smartvision sv-mode enable` Use the ‘no’ form of the command to disable SmartVision edition. ### Parameters `None` ### Example The following example enables SmartVision edition on a Classic edition Network Security appliance. ``` hostname (config) # smartvision sv-mode enable ``` ### User role Administrator or analyst or operator ### Command mode Enable ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 9.1.4