--- title: "snmp" slug: "snmp-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:26:59Z published: 2026-11-19T12:26:59Z canonical: "docs.trellix.com/snmp-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # snmp The SNMP service when enabled in the Linux based Manager allows administrators to view and manage the Linux machine attributes remotely. > [!NOTE] > Note > > The service is disabled by default on a fresh installation of the Linux based Manager. You need to issue the `snmp enable` command to enable it. > [!NOTE] > Note > > The default configuration present in snmpd.conf file allows you to read limited number of machine attributes. You can modify this file using the `edit snmpd.conf` command to view the attributes of your choice. Upon modifying the file, issue the `snmp restart` command for the changes to be effective. > [!NOTE] > Note > > The default SNMP community string set in the configuration file is `mlosnsm`. You can use this string for authentication, or change it through snmpd.conf if you intend to use a different string. Restart the SNMP service upon changing the string. The `snmp` command displays a list of commands in the Manager shell which can be used to perform actions on the SNMP service in the Linux based Manager. This command has no parameters. **Syntax:**`snmp` **Sample Output:** `IPSManager> snmp` `Expected one of` `disable Disable snmpd service` `enable Enable snmpd service` `restart Restart snmpd service` `start Start snmpd service` `status Show snmpd Status` `stop Stop snmpd service`