--- title: "snmp-server host" slug: "snmp-server-host" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:31Z published: 2026-08-04T17:22:31Z canonical: "docs.trellix.com/snmp-server-host" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # snmp-server host ### Description Enables the sending of Simple Network Management Protocol (SNMP) traps to a specified IPv4 or IPv6 address. You can specify any number of trap “sinks” (one per command). > [!NOTE] > Note > > This command enables system notifications. Use the [fenotify snmp](/network-and-platform/docs/fenotify-snmp) command to enable alert notifications. Use the `no` form of this command to disable the sending of SNMP traps. ### Syntax `[no] snmp-server host ip_address disable` `[no] snmp-server host ip_address traps {community_string | port <port> [community_string] | version <version_number> [community_string]}` ### Parameters `ip_address` IP address where SNMP traps are sent. `disable` Disables the sending of SNMP traps to the specified address. `community_string` Community string needed to send traps to the specified address (default is “public”). `traps` Enables the sending of SNMP traps to the specified address. `port <port>` Overrides the default target port to which traps are sent. `version <version_number` SNMP version of the generated traps (1, 2c, or 3) ### Example The following example enables SNMP version 1 traps to be sent to the specified address using the private community string. ``` hostname (config) # snmp-server host 10.0.0.2 traps version 1 private ```