--- title: "Specifying the minimum Transport Layer Security (TLS) version requirement" slug: "specifying-the-minimum-transport-layer-security-tls-version-requirement-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:07Z published: 2026-09-01T19:03:07Z canonical: "docs.trellix.com/specifying-the-minimum-transport-layer-security-tls-version-requirement-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Specifying the minimum Transport Layer Security (TLS) version requirement Use the commands in this section to specify the minimum version requirement for Transport Layer Security (TLS) that should be used. The default is to use TLS v1.2. To specify the required minimum TLS version using the CLI: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Specify the minimum TLS version requirement: ``` hostname (config) # web server ssl min-version ``` where: - `<value>` is `tls1` (TLS v1), `tls1.1` (TLS v1.1), or `tls1.2` (TLS v1.2). The default is `tls1`.2. 3. Verify your change: ``` hostname (config) # show web ``` 4. Save your changes: ``` hostname (config) # write memory ``` To reset the minimum TLS version requirement to the default: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Reset the minimum TLS version requirement to the default (TLS v1.2): ``` hostname (config) # no web server ssl min-version ``` 3. Save your changes: ``` hostname (config) # write memory ``` ### Example The following example sets the minimum TLS version requirement to TLS v1.2. ``` hostname (config) # web server ssl min-version tls1.2 ``` :