--- title: "ssh server enable" slug: "ssh-server-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:36Z published: 2026-08-04T17:22:36Z canonical: "docs.trellix.com/ssh-server-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # ssh server enable Enables or disables the SSH server. If the SSH server is disabled, the CLI is only accessible through the serial console, not through an SSH session. Disabling the SSH server does not terminate existing sessions, but prevents new sessions from being established. ### Syntax `[no] ssh server enable` ### Parameters `no` Use the `no` form of this command to disable the SSH server. ### Example The following example enables the SSH server. ``` hostname (admin) # ssh server enable ``` ### User role Admin ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Release 7.4.0 - **Central Management System:** Release 7.5.0 - **Email Security — Server:** Release 7.1.0 - **File Protect:** Release 7.5.0 - **Endpoint Security (HX):** Release 2.5.0 - **Network Security:** Release 7.5.0 - **Intelligent Virtual Execution - Server**: Release 7.9.0